Parkview Fabrications logo

Ashford

Ashford Local Authority & Public Realm Metalwork

Call 07873 263431Get a Free Quote

Same day callback across Kent

Ashford has grown faster than most Kent towns, and the council metalwork it needs reflects a place that is part historic market town, part rail town and part new development. Ashford Borough Council carries the parks, play areas, open spaces and much of the public realm, and Kent County Council covers highways, schools and rights of way. What makes Ashford distinctive is the amount of water and green space woven into the built up area, from the Great Stour running through Victoria Park to Singleton Lake and the wider Conningbrook Lakes Country Park, all of which need edge protection, path handrail, access barriers and gates. Victoria Park is the town's showpiece, with the Hubert Fountain at its centre and the river running along its edge. Council metalwork in Ashford there means ornamental boundary railings that have to be matched rather than replaced with a modern panel, bridge and river edge guard rail, bench and bin frames, cycle stands and play area metalwork. At Singleton and Conningbrook the emphasis shifts to lakeside edge protection, height restrictors and access barriers that stop unwanted vehicles without blocking mobility access, kissing gates on the path network, and fishing platform frames and handrail. Both settings are damp, so fixings and finishes are chosen accordingly and Paul sets them out in writing before manufacture. The town centre presents a different problem again. Ashford's ring road was reworked into shared space around Elwick Road and the Bank Street area, and a shared surface relies heavily on well placed bollards, low guard rail, seat and cycle furniture and tactile edges to work safely. Anything installed there has to be robust, consistent with what is already in place and capable of taking vehicle contact without shearing at its root. Around Park Mall, Elwick Place and the station approaches the requirement is similar. Housing land across Ashford, including the newer development at Chilmington Green and the established estates at Stanhope, Kennington and Willesborough, needs communal entrance gates, bike stores, bin enclosures, stair balustrades and ramp handrails built to a stated loading. Schools need line gates, secure boundary infill and sports pitch metalwork. Ashford's industrial and logistics estates generate heavier work for the council and its contractors, including depot yard gates, sliding gate frames, security grilles, dock edge protection and structural steel repairs. Parkview Fabrications handles both ends of that range with the same operator, so a job that starts as a railing repair and turns out to need structural attention does not have to be handed on. Out of hours access is available where a school, depot or shared space street cannot be disturbed during the day. Email parkviewfabs@gmail.com or call Paul on 07873 263431 with a location, a photo and any loading or finish requirement.

Newly fabricated galvanised steel handrail and balustrade installed on public steps

More in Ashford

Local Authority & Council Metalwork in Ashford: FAQs

Common questions about local authority & council metalwork from Parkview Fabrications in Ashford.

Yes. Victoria Park in Ashford has ornamental boundary railings that deserve matching rather than replacing with a modern panel, and Parkview Fabrications will reproduce bar spacing, rail section and post detail. Send a photograph and a couple of measurements and Paul will confirm what can be matched before anything is quoted.

Yes. Lakeside edge protection, path handrail, height restrictors, access barriers, kissing gates and fishing platform frames at Singleton Lake and Conningbrook Lakes Country Park in Ashford are all within scope for Parkview Fabrications, with fixings and finishes chosen for consistently damp ground rather than a standard dry footpath detail.

Yes, because a shared surface depends on it. Bollards, low guard rail and seat and cycle furniture around Elwick Road and Bank Street in Ashford have to be robust, consistent with the existing scheme and able to take vehicle contact without shearing at the root, and Parkview Fabrications specifies accordingly.

Ashford Borough Council covers parks, play areas, open spaces and much of the public realm, while Kent County Council covers highways, schools and rights of way. Parkview Fabrications works for either, and for their contractors, taking the written specification from whichever body raises the order for the Ashford site.

Yes. Depot yard gates, sliding gate frames, security grilles, dock edge protection and structural steel repairs on Ashford council and contractor sites are handled by Parkview Fabrications. Sections and running gear are sized for the vehicles that actually use the yard rather than to a generic specification.

Yes. Communal entrance gates, bike store frames, bin enclosures, stair balustrades and ramp handrails on Ashford housing land, including the newer development at Chilmington Green and established estates at Stanhope, Kennington and Willesborough, are fabricated and repaired by Parkview Fabrications to the loading the authority sets.

Yes. The Great Stour runs through Ashford, and Parkview Fabrications repairs and replaces river edge guard rail, bridge parapet metalwork and handrail on steps and ramps down to the water. Fixings into older masonry are detailed with care rather than resin bolted into whatever surface is available.

Yes. Line gates, secure boundary infill and sports pitch metalwork on Ashford school sites are programmed by Parkview Fabrications for holidays, evenings or weekends where a site cannot be disturbed. The access window is written into the scope of works so the site manager knows when the work happens.

Yes. Paul covers light and heavy engineering, so an Ashford job that starts as a railing repair and turns out to need structural attention stays with Parkview Fabrications rather than being handed to a subcontractor part way through. The same person quotes it, makes it and installs it.

Send the location, a photograph and any loading or finish requirement to parkviewfabs@gmail.com, or call Paul on 07873 263431. Parkview Fabrications will confirm whether an Ashford site visit is needed, then issue a written scope of works and a fixed quote against that scope.